ยางซิลิโคนหล่อติดกลับวัสดุต่างๆ ทำอย่างไรก็หลุดล่อนSilicone keeps peeling off other materials: how to make it stick
ยางซิลิโคนเมื่อแข็งตัวแล้ว จะมีความลื่น (Release) ของผิวยางสูง ซึ่งเป็นคุณสมบัติที่โดดเด่น ทำให้ชิ้นงานไม่ติดแม่พิมพ์ สามารถถอดออกจากแบบแม่พิมพ์ได้ง่าย และมีผิวงานที่เรียบเป็นเงางาม ด้วยความลื่นของผิวยางซิลิโคนสูง เมื่อหล่อยางซิลิโคน RTV บนพื้นผิววัสดุต่างๆ ทั้งโลหะและอโลหะ ทำให้ยางซิลิโคนหลุดล่อนจากแบบ และไม่สามารถนำกาวอุตสาหกรรมมาทาเพื่อยึดติดภายหลังได้
การหล่อยางซิลิโคนเพื่อยึดติดกับวัสดุ ต้องมีกาวเฉพาะทางร่วมด้วย เพียงทำความสะอาดพื้นผิวที่ต้องการยึดติดยางด้วยตัวทำละลาย อะซิโตน ทินเนอร์ หรือแอลกอฮอล์ สเปรย์หรือทากาว 1200 OS PRIMER ด้วยแปรงให้ทั่ว รอแห้ง นำยางซิลิโคน RTV ที่ผสมตัวทำแข็งแล้วเททับ รอยางซิลิโคนแข็งตัว ยางซิลิโคนจะติดแน่นเป็นเนื้อเดียวกับวัสดุ เช่น Pad Printing
Cured silicone has a very slippery (release) surface. This is one of its best properties: parts don't stick to the mold, come out easily and have a smooth, glossy finish. But because the surface releases so well, RTV silicone cast onto metal or non-metal surfaces peels away from them, and industrial glue can't be used to bond it afterwards.
To bond silicone to a material, you need a special primer. Clean the surface with a solvent such as acetone, thinner or alcohol. Spray or brush 1200 OS PRIMER evenly over it and let it dry. Then pour RTV silicone mixed with its curing agent over it and let it cure. The silicone will bond firmly to the material, as in pad printing.





