สภาพสิ่งแวดล้อมในการทำงานหล่อยางซิลิโคนWorking conditions for casting silicone rubber
ยางซิลิโคน RTV กลุ่ม Addition cure
หลักการผสมที่อุณหภูมิห้อง (Base 100 : Curing Agent 10) จะมีระยะเวลาทำงานประมาณ 15 นาที และรอแข็งตัวพร้อมใช้งาน 10 ชม. เราสามารถทำให้ยางซิลิโคนหลังเทลงแบบแล้วแข็งตัวเร็วขึ้นได้ ด้วยการนำยางซิลิโคนใส่ในตู้อบความร้อน (Oven Cure) โดยความร้อนจะมีผลให้ค่าหดตัวเพิ่มขึ้นเล็กน้อย 0-0.3%
| อุณหภูมิ | เวลาแข็งตัว |
|---|---|
| 25 °C | 16 ชม. |
| 70 °C | 30 นาที |
| 90 °C | 15 นาที |
| 150 °C | 5 นาที |
ยางซิลิโคน RTV กลุ่ม Condensation cure
ไม่สามารถใช้ความร้อนเร่งการแข็งตัวของยางซิลิโคนได้ เราสามารถเลือกใช้ชนิดของตัวทำแข็งที่นำมาผสมกับยาง (Base 100 : Curing Agent 5) เพื่อให้มีเวลาทำงานที่เหมาะกับลักษณะงานที่ทำ เช่น งานแนวตั้งขนาดใหญ่ งานเทในบล็อคพิมพ์
| ตัวทำแข็ง | ระยะเวลาทำงาน | เวลาแข็งตัว |
|---|---|---|
| 3081 VF | 5 นาที | 1-2 ชม. |
| 3081 F | 15 นาที | 4-6 ชม. |
| 3081 R | 30 นาที | 12 ชม. |
Addition-cure RTV silicone
Mixed at room temperature (Base 100 : Curing Agent 10), it has a working time of about 15 minutes and is ready to use after about 10 hours. You can make the silicone cure faster after pouring by putting it in an oven (oven cure). Heat increases shrinkage slightly, by 0-0.3%.
| Temperature | Cure time |
|---|---|
| 25 °C | 16 hours |
| 70 °C | 30 minutes |
| 90 °C | 15 minutes |
| 150 °C | 5 minutes |
Condensation-cure RTV silicone
Heat cannot be used to speed up curing. Instead, choose the type of curing agent you mix with the base (Base 100 : Curing Agent 5) to get a working time that suits the job, such as large vertical pieces or pouring into a mold box.
| Curing agent | Working time | Cure time |
|---|---|---|
| 3081 VF | 5 minutes | 1-2 hours |
| 3081 F | 15 minutes | 4-6 hours |
| 3081 R | 30 minutes | 12 hours |





